Tag Archives: mimo

Different Categories of UE in LTE

Categories of UE in LTE is divided by its function which is as per below. Functionality: eNB obtains the UE radio capabilities via: • The S1AP initial setup request message


Fully packet-oriented mobile broadband network providing: – Peak data rates of 100 Mbps (DL) and 50 Mbps (UL) – Very low latency – Seamless and lossless handover – Sophisticated QoS

MIMO Single User for LTE

SU-MIMO = Single User MIMO It is the most common form of MIMO. Each user is served by only one BS and it occupies the resource exclusively, including time, frequency.

MIMO Multi User in LTE

MIMO-MU = Multi user It is used only in Uplink. MIMO-MU does not increase the individual user’s data rate but it does offer cell capacity gains that are similar to,

MIMO = Multiple Input Multiple Output in LTE

MIMO = Multiple Input Multiple Output 2 or more transmitters and 2 or more receivers. MIMO transmits several streams whereas SIMO or MISO transmits only one stream. If there are

Affects of the Channel in LTE MIMO

To understand the impact of the channel, let’s assume that the base station receiver is facing many challenges in the same MIMO receiver that universal areas, but also must receive

Receiver Design for LTE

The main objective of the study is to take action for the entire measurement receiver. However, many factors can affect the performance of the receiver, such sub-blocks of receipt must

The MIMO channel Matrix

The MIMO channel Matrix Consider for a moment in time, on the same frequency and channel modeling as a black box with durable internal components. If we add two completely